Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A Candid Look at Sex Dolls Right Now- The Truth
#1
[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]VIEW THE BEST SEX DOLL FEET GUIDE HERE[/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
It's only when purchasers need standing feet that they notice them, and the difference is immense. Everything from what you can do with the doll to how she stores, photographs and wears over time shifts because of this small detail on the spec sheet. Get to grips with the difference before you order and you've taken one of the simplest steps towards evading an annoying purchase.

Metal Bolts Embedded in the Soles
Boiled down, the difference is uncomplicated. Standing feet come with metal bolts embedded in the soles, and these permit the doll to stand upright without support. The doll can only sit or lie down on non-standing feet, which lack these bolts, and attempting to stand her will damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.

The Photographer's Choice
Standing feet are what photography and display depend on. Photographed in full-length poses without apparent supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the primary reason most photographers specify standing feet when ordering.

Water Absorption Leads to Rust
If you want shower use, standing feet are important as well. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and unsafe. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. This is a real safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

Never Shower a Non-Standing Doll
The shower use point needs expanding, since so many damaged dolls are down to it. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. After that, water rusts the metal skeleton inside the leg; you won't see it for weeks or months, and it's essentially unfixable once it starts. However careful you are, keep a doll with non-standing feet out of the shower, because the water will find its way in irrespective of your precautions.

Standing Storage Explained
Standing feet are also easier to store in some setups. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. Without room for a hanging setup, this is a space-efficient alternative, and for anyone who wants to display the doll rather than keep her hidden it's a great one. Some buyers prefer that the standing feet make it possible to store the doll in a way that's evident and accessible.

Extremely Tight Budgets and Standing Feet
Standing feet cost a little more and weigh somewhat more, and that's the disadvantage. Few percent higher is the normal price versus a doll with non-standing feet, with the metal bolts adding a small quantity of weight and the manufacturing process being more involved. Buying on a very tight budget? The difference is small and usually worth the extra cost, but it's worth knowing about.

Bolts Showing When the Feet Are Bare
The bolts can show if the feet are bare, which is the other drawback. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some purchasers find this distracting. Evading standing feet completely over this would be unnecessary; it's a small aesthetic issue that closed shoes, or footwear that conceals the bolts, will solve.

Know What You Want
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly enough, and the savings can go on upgrades such as articulated hands or a better wig. If you know what you want, this is a completely valid choice.

Comfortable to Touch
Also, non-standing feet are slightly softer and more adaptable, something some purchasers find more comfortable to touch. Subtle as it is, and not ordinarily enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

The Big Risk With Non-Standing Feet
The sizable risk with non-standing feet: buyers forget what kind of feet they have and attempt to stand the doll regardless. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a typical mistake. Even if you attempt to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.

Adding Bolts Afterwards
And what about retrofitting standing feet to a doll that doesn't have them? The short answer is no, not easily. Cutting into the feet and installing new hardware is what adding the bolts subsequently requires, which is expensive and frequently doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. If you might want standing feet later, and you're considering a doll without them, buying a doll with standing feet in the first place beats trying to add them later.

Photography, Display or Shower: You Need Standing Feet
When opting for between standing and non-standing feet, the useful advice is straightforward. If any of photographing the doll, displaying her standing, or using her in the shower is on the cards, you need standing feet. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly acceptable. For the unsure, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small additional cost.

Lying Down Storage Needs More Space
There's also a gender consideration worth mentioning. Because they're heavier and more tricky to store in any other way, male dolls ordinarily advantage from standing feet more than female dolls. Stored lying down, which puts pressure on the body and needs more space, is how a 45kg male doll that can't stand has to be kept. A genuine advantage for customers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

Industrial-Looking Soles on Delicate Dolls
To finish, the aesthetic difference between standing and non-standing feet is worth noting. The bottom of standing feet is slightly harder because of the bolts, something that can be visible when the doll is barefoot. The look of the hard soles is a little industrial, and some purchasers find that less aesthetically satisfying, particularly on dolls with delicate features. The softer and more natural look of non-standing feet is what some buyers prefer. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.

Maintenance: Check the Bolts Periodically
There's also a maintenance angle that's worth considering. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. Every few months, give the bolts a gentle twist to check them, and tighten them with the fitting tool if they feel loose. In the long run non-standing feet are somewhat lower-maintenance, since there's no hardware to come loose and so no such issue.

Smooth Floors Need Extra Support
On different surfaces, the bolts affect how the doll stands. Carpet suits the bolts, which grip well, leaving the doll constant. On silky hard flooring in particular, the bolts can slip, and the doll may need additional support to stay upright. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it avoids sliding. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

Ordinarily Invisible in Shoes
A final consideration is regularly overlooked: how standing feet affect the doll's overall proportions. Adding a small amount of length to the foot, the bolts can somewhat change the way the doll looks in barefoot photos. Normally invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. A little shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

Extra Cost for Extra Options
Choices for posing, display, storage and the shower are opened up by standing feet, which non-standing feet can't match, making them worth the extra cost for most buyers. Skipping them is for buyers certain that bed use is all the doll will get, with no standing display or photography. For everyone else, standing feet are the better choice, and they're one of the simplest upgrades to justify. More info at this rosslink. Also check out visit their website which is worth considering with click this link here now and more tips here for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)